The UFO mining lamp is actually an industrial and mining lamp shaped like a flying butterfly. So what is the UFO mining lamp power supply, and what are its characteristics? Today, Zhongfu Optoelectronics Technology tells you the characteristics of UFO industrial and mining lamp power supply:

Features of UFO high bay light power supply

1.UFO high bay light power supply has a long life

A practical comparison, Zhongfu found that the life of an industrial and mining lamp can reach 50,000 hours. The life of an ordinary lamp is usually only 5,000 hours (some domestic lamps have a life of only 300 hours). The difference between the two is nearly 10 times. Although some poor mining lamps are only 10,000 hours, they are still nearly five times different from ordinary lamps.

2. UFO high bay light power supply is more energy efficient

The UFO power supply is an energy-saving product, and the efficiency of the drive power supply is high. It is especially important for the structure where the UFO high bay light source is installed in the luminaire. Because the luminous efficiency of the UFO decreases as the UFO temperature increases, the heat dissipation of the UFO is very important. The power supply has high efficiency, its power consumption is small, and the heat generated in the lamp is small, which reduces the temperature rise of the lamp. It is more beneficial to delay the light decay of UFO.

3.UFO high bay light source has high luminous efficiency

The luminous efficiency of industrial and mining lamps is above 100 lm/W, and will continue to increase in the future. In the future, it is possible to reach more than three times. High bay light lamps are efficient. The efficiency of the luminaire mainly refers to the effective light effect, and the mining lamp is illuminated at 120 degrees, so all the light is effective light. Although sometimes the 120 degree illumination angle is narrower, it is still sufficient in most cases.

And UFO high bay lights are typically up to 90% efficient, and an 18W high bay energy saving lamp requires only 20W of input power. The power factor can also reach 0.9 or more. Compared with ordinary lamps, it can save more than half of the electricity, which means that an 18-watt industrial lamp can replace a 36-watt ordinary lamp. These are the characteristics of UFO mining lamp power supply!